Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

P3TDE6 powers on but no video

  
   Hardware Problem Solving Community! (Home) -> Supermicro RSS
Next:  X6DAT-G2 Availability?  
Author Message
netnut

External


Since: Oct 22, 2004
Posts: 1



(Msg. 1) Posted: Fri Oct 22, 2004 8:21 pm
Post subject: P3TDE6 powers on but no video
Archived from groups: alt>comp>periphs>mainboard>supermicro (more info?)
This is similar to the other poster in which cleaning the P3 slot
worked. It does not for me.

Mobo is P3TDE6 dual 1 Ghz PIII, 2 Gig RAM, 2x68 Gbyte Seagate SCSI,
1X200 Gbyte Maxtor IDE, PNY Geforce 4 128 Mbyte Video Card.

2 days ago saw that the system was powered on but otherwise dead. here
are all the things I tried that did not work:
replaced battery, which was low.
removed one cpu then the next cleaned the cpu's and air cleaned the
sockets.
removed all hard disks.
changed the vga card.
removed one memory card, system complained with POST beeps, put the
card back no POST beeps
tried booting via CDROM.
cussed and waved my hands around. no effect Smile

perhaps there is some magic to cleaning the cpu slot ? or maybe my
bios is nuked ?

Netnut

 >> Stay informed about: P3TDE6 powers on but no video 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
P3TDE6 and 1,7 V Core PIII - Hello. I have aquestion: the VRM of the P3TDE36 main PCB is specified to deliver a core voltage up to 1,5V. I read about some tests using 'normal' (no Tualatin) PII CPUs with success on this mainboard. I have two PIII 866 Mhz Coppermines and I need to..

P3TDE6, BIOS setting for "Parity" - The BIOS setup menu has an entry called "Enable Parity" that is not documented in the manual. The default is "disable". Does anyone know what this does ?

P3TDE6: GART setting in BIOS ? - "GART W2K Miniport Driver" - Enable/Disable Can anyone say what this setting does and what the preferred config is for Win 2K server ?

Serverworks chipset config on P3TDE6 ? - I have a couple of P3TDE6 in workstation use. The chipset and memory runs pretty warm. I believe that this is mostly a result of constant cycling through memory looking for ECC faults and rewriting if found. I understand that this is a feature in a..

P3TDE6, hangs on boot from SCSI CDROM - This system has a SCSI CDROM and two IDE drives on a Promise RAID controller. At boot time it recognizes a Windows 2000 server CDROM, and begins to run it. Then it comes up with "Couldn't open the boot partition to check for a signature", fo...
   Hardware Problem Solving Community! (Home) -> Supermicro All times are: Pacific Time (US & Canada)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]